The SPice10205 is a low cost add-on for SPLat programmable OEM controllers. It provides for 6 levels of water level sensors. It is ideal for pump control panels, tank level control and other applications requiring water level detectors.
The principle of operation is that you have electrodes in the water. One electrode is a "common". Typically this will be at the bottom of the tank, or if the tank is metallic it might be the tank itself. You then have one electrode per level that you need to sense. Once the water bridges the gap between the common electrode and a "level" electrode, the board senses the electrical conduction and provides an "ON" input to the controller.
NOTE: The animation shows 3 levels. The SPice10205 has 6 levels, while the SPice10200 has 2 levels + temperature.
Fasteners and connectors included but not shown
This includes the board 6-channel water level (conductivity) switch, matching connectors and fasteners for securing to the host controller.
Note: You must provide your own electrodes to suit the application. Typically a stainless steel bolt through the wall of a plastic tank, or insulated from the wall of a metallic tank, will work.
- 1 - 4AUD71exGSTUSD≈54
- 5 - 9AUD71exGSTUSD≈54
- 10 - 24AUD70exGSTUSD≈53
37g / 1.3oz