Tech Support: Expansion I/O numbers (In Control)

« New counter feature | Main | Tech Support: Bidirectional I/O trick »

Tech Support: Expansion I/O numbers

Kim asked:

Hi David,

Can I connect 2 x FP16 and 1 x XIRO16 to a MMi202 and still see the IO's in the simulator window?

Hi Kim, yes you can. The FP16 is 8 in and 8 out. The XIRO16 is the same. So all together you will have 24/24. With the XPice expansion scheme you can go to 32 in and 32 out.

Posted on July 23, 2007 4:07 PM | Permalink

TrackBack

TrackBack URL for this entry:
http://www.splatco.com/cgi-sys/cgiwrap/microcon/managed-mt/mt-tb.cgi/58

Post a comment

(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)

Name:

Email Address:

URL:

Remember personal info?

Comments: (you may use HTML tags for style)

Enter the security code shown above:

Search

About

This page contains a single entry from the blog posted on July 23, 2007 4:07 PM.

The previous post in this blog was New counter feature.

The next post in this blog is Tech Support: Bidirectional I/O trick.

Many more can be found on the main index page or by looking through the archives.

Subscribe to this blog's feed
[What is this?]

This weblog is licensed under a Creative Commons License.

In Control

About embedded electronic control systems. David Gibson, SPLat Controls